Obutto R3volution

From Simwiki.net
Revision as of 04:03, 12 January 2025 by Shovas (talk | contribs) (Created page with "Category:Hardware Category:Cockpits == Raising Seat Height == * Insert metal washers between track and cockpit base where it is bolted together ** M8x45mm Hex Head Bolts ** 3x 1" Metal flat washers, ~1/4" Inner Diameter *** Or 3x 1-1/4" Metal flat washers (~1/4" Inner Diameter) *** Three of these is roughly 1/4" of added height. It's actually very noticeable as a little extra height at the eye means a greater vertical angle at the monitor's distance. *** I had t...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Raising Seat Height

  • Insert metal washers between track and cockpit base where it is bolted together
    • M8x45mm Hex Head Bolts
    • 3x 1" Metal flat washers, ~1/4" Inner Diameter
      • Or 3x 1-1/4" Metal flat washers (~1/4" Inner Diameter)
      • Three of these is roughly 1/4" of added height. It's actually very noticeable as a little extra height at the eye means a greater vertical angle at the monitor's distance.
      • I had to abandon the lock washers to make 3 fit. I am ordering longer bolts to properly accommodate everything needed.
    • Bonus: Buy longer M8x100mm or longer bolts to increase the washers you can insert and therefore the height you can gain
      • I bought M8x100mm and M8x150mm on Amazon for a decent price. Probably could've/should've bought cheaper at Home Hardware or Home Depot.
Retrieved from "https://www.simwiki.net/wiki/index.php?title=Obutto_R3volution&oldid=2407"